Installing/mounting
4
4.1 Installation safety precautions
WARNING
In applications with working pressures/media that can be dangerous to people, surroundings,
equipment or others in case of pipe fracture, we recommend that special precautions such
as
special
placement,
shielding or installation of a security guard or a security valve are taken
when the sensor is mounted.
● Ensure that stresses and loading caused by e.g. earthquakes, traffic, high winds and fire
damage if appropriate are taken into account during installation.
● Ensure that the flowmeter is installed such that it does not act as a focus for pipeline
stresses. External loadings are not taken into account in the flowmeter design.
● Provide adequate protection to minimise any risk of contact with hot surfaces.
WARNING
Prevent personal injuries by assuring that operation below pressure guards cannot take
place, if working with vacuum or fluids boiling readily.
4.2 Use according to specifications
"Use according to specifications" covers:
● Use within technical limits.
● Consideration of liquid specifications and references.
● Consideration of specifications as to installation, commissioning and maintenance.
● Operating pressure and temperature must be within the limits indicated on the product label.
● Flow and density must be within the specified limits
Do NOT:
● Use the flowmeter as elastic equalization in pipe systems to compensate for e.g. pipe
displacement, pipe vibration, expansion, etc.
● Use the flowmeter as footboard for installation purposes.
FUP1010 IP67 Portable Flowmeter
Operating Instructions, 02/2010, A5E02951522A Revision 01
19
To Next Page
Loading...
Need help?
General
