DANGER
Attempting to use the unit in a submerged environment with the cover open or latches not
engaged will result in
damage to the unit that cannot be repaired and could expose the user
to the risk of electric shock.
CAUTION
Charge the 1015BB Battery Pack (7ME39403BB00) in a completely dry environment only.
Do not close the battery pack cover while battery pack is being charged.
To charge the 1015BB Battery Pack:
1. Referring to the cautions above, place the 1015BB Battery Pack on a flat surface (such as
a table or bench). Ensure that an AC outlet is available at or close to the location.
2. Open the Battery Pack cover. Leave it open for the entire charge time.
Connecting
5.1 Transmitter Wiring
FUP1010 IP67 Portable Flowmeter
26
Operating Instructions, 02/2010, A5E02951522A Revision 01
3. Plug the 1015BCK-2 Adapter/Battery Charger (USA) (7ME39403BC10) or 1015BCA-2
(EURO) (7ME39403BC20) AC power cord into a proper AC source. Plug the Battery
Charger DC output cable into the DC input connector on the 1015BB Battery Pack.
4. Charge the Battery Pack for at least 8 hours before using it for the first time.
To Next Page
Loading...
Need help?
General
