88
Control Setting: LC01...LC44
These parameters contain advanced adjustment parameters which affect the
motor gains, system inertia gains, pre-torque, etc.
Timer Parameters: LT01...LT13
These parameters adjust brake and drive signaling timers.
Positioning Parameters: LP01...LP08
These parameters contain the adjustments needed for the drive
Special Functions: LX01...LX18
These parameters allow advanced adjustment of the drive and facilitate function
tests of drive components.
Configuration Handling: CH01...CH03
These settings allow a user to save parameters and default to OEM settings.
Analog I/O: LA01...LA40
These parameters define and adjust the analog inputs and outputs.
Outputs: LO01...LO20
These parameters define the functionality of the relay and solid-state drive
outputs.
To Next Page
Loading...