274
ADDENDUM V – SECURITY
SECURITY SETUP
1. Go to MAIN MENU | SETUP | SECURITY to access the menu items for setting up security.
Below is the hierarchy for the Security menu:
2. Enable CC Lockout (Yes/No)
a. This item enables / disables the car call security inputs (CCE) on the SRU board and
any programmed Access Codes.
3. Timed Lockout HC (Yes/No)
a. This enables the hall call buttons to be locked out similar to Enable CC Lockout
based on the time set in Start/Stop settings
4. Use Floor Codes (Yes/No)
a. This enables the use of an access code (see section 7) to unlock specific floors.
5. Independent Service Overrides (Yes/No)
a. Allows putting the car on Independent Service to bypass any active security.
6. Start/Stop Time (M-F); Start/Stop Time (S-S)
a. This is where the timed security start and stop time for Monday through Friday
(M-F) and Saturday and Sunday (S-S) is inputted. This time is adjustable in 15
minute increments. To lock out a timed 24 hour period set both the Start and Stop
times to the same time (i.e. 12:00AM). This is useful for customers with buildings
that don’t want to allow weekend access but desire timed access during the
weekdays.
Main Menu
Setup
Security
Enable CC
Lockout
Yes/No
Timed
Lockout HC
Yes/No
Use Floor
Codes
Yes/No
Ind Srvc
Overrides
Yes/No
Start Time
(M-F)
--:--
Stop Time
(M-F)
--:--
Start Time (S-
S)
--:--
Stop Time (S-
S)
--:--
Per Floor
Options
Floor 1
Floor 1 (F)
24/7
Yes/No
Floor 1 (R)
24/7
Yes/No
Floor 1 (F)
Timed
Yes/No
Floor 1 (R)
Timed
Yes/No
Access Code
(F)
1 1 1 1
Access Code
(R)
1 1 1 1
Floor 2,
Floor 3,
etc.
To Next Page
Loading...
Need help?
General
