Solartron 1250 - Program Commands; Data Output Commands; RS423;GPIB Commands

The RS423 and GPIB Ports. Remote Control 1250 Frequency Response Analyzer
13-14 AMK/1250/4
Facility Parameter Code Arg Meaning Max Min Init
LIST FILE FO none none
CLEAR FILE FC none none
FILE
POPULATION
?FP 0 Number of
results in file
File size 0 none
?FP 1 File pointer ~470 0 none
NUMBER OF READINGS TAKEN ?NR none 99999 0 none
NUMBER OF READINGS ACCEPTED ?NA none 99999 0 none
FILE SIZE FS D ~470 1 99
13.7.14 PROGRAM COMMANDS
Facility Parameter Code Arg Meaning Max Min Init
ENTER LEARN MODE *L I program no. 9 1 none
ENTER EDIT MODE *E I program no. 9 1 none
CLEAR PROGRAM *C I program no. 18U 1 none
COPY PROGRAM *K I,I program no. 18 1 none
EDIT NEXT LINE *F none none
EDIT PREVIOUS LINE *B none none
EDIT DELETE LINE *D none none
EDIT INSERT MODE *I none none
EXIT LEARN/EDIT MODE *Q none none
LIST PROGRAM *P I program no. 18 1 none
EXECUTE PROGRAM EP I program no. 18 1 none
JUMP JP I jump to line no. none
PAUSE/CONTINUE CP none none
PROGRAM LENGTH ?PN n 18 1
13.7.15 DATA OUTPUT COMMANDS
Facility Parameter Code Arg Meaning Max Min Init
DATA OUTPUT OP I,I Device, Output:
Device:
0=display
1=RS423
2=GPIB
3=file
3 0 display
Output: 4 0 none
0=off
1=all
2=fail
3-pass
4=dump
available on all devices
available on all devices
available on all devices
available on all devices
(RS423 and GPIB only)
GPIB OUTPUT FORMAT RO I Format 1 0 0
(1250N only, GPIB in Talker/Listener mode only) 0=Frequency, Real, Imag, Error Code
1=Real, Imag, Frequency, Error Code
13.7.16 RS423/GPIB COMMANDS
Facility Parameter Code Arg Meaning Max Min Init
GPIB SRQ CONFIGURE SV I 0=unconfigure 255 0 0
GPIB PARALLEL PP I 0=unconfigure 8 0 0
POLL CONFIGURE 1=lsb
↓
8=msb
GPIB PARALLEL PS I 0=false 1 0 true
POLL SENSE 1=true
U programs10 to 18 may only be cleared when in ‘Supervisor’ mode