Solartron 1250 - Table of Contents

1
Contents
Section Page
Chapter 1 General Information
1.1 Introduction 1.3
1.2 Basic measuring set-up 1.3
1.3 The instrument essentials 1.4
1.4 Additional facilities 1.5
1.5 1250 Variants 1.7
1.6 Options 1.8
Chapter 2 Installation
2.1 Safety 2.2
2.2 General Safety Precautions 2.2
2.2.1 Electromagnetic Compatibility 2.3
2.3 Connecting the ac mains 2.4
2.3.1 Safety precautions: Earthing 2.4
2.3.2 Procedure 2.4
2.4 Accessories 2.5
2.5 Rack Mounting 2.5
2.5.1 Rack Dimensions 2.6
2.5.2 Ventilation 2.6
2.5.3 Fitting Telescopic Slide Mounting Kit 12505B (Accuride) 2.6
2.5.4 Fitting Telescopic Slide Mounting Kit 12505C (Jonathan) 2.11
Chapter 3 Switching on and Initialising
3.1 Switch On 3.2
3.2 Initialising 3.3
3.3 Resetting 3.4
Chapter 4 Making Measurements: The Generator
4.1 Simple Measurements 4.2
4.2 Setting the Generator 4.2
4.2.1 Introduction 4.2
4.2.2 Setting the Generator Menu 4.2
4.2.3 Waveform 4.2
4.2.4 Frequency 4.3
4.2.5 Clear 4.4
4.2.6 Amplitude 4.4
4.2.7 Bias 4.4
4.2.8 Modulated Carrier 4.4
4.3 Checking Generator Settings: Using the Status Displays 4.4
4.4 Starting the Generator 4.5
4.4.1 Generator Start Key 4.5
4.4.2 Generator Waveform Starting Point 4.5
4.5 Rack Stopping the Generator 4.5
4.5.1 Introduction 4.5
4.5.2 Generator Stop Key 4.5