13-1
13
The RS423 and GPIB Ports.
Remote Control
Section Page
13.1 Introduction 13.3
13.1.1 GPIB Capacity Code 13.3
13.2 Connections 13.4
13.3 RS423 Baud Rate 13.4
13.4 RS423 Input Command Terminator Character; RS423 Character
Frame 13.4
13.5 GPIB Switches 13.5
13.5.1 Address switches 13.6
13.5.2 Input Command Terminator Character Switches 13.6
13.5.3 Talk Only Switch 13.6
13.5.4 GPIB Switch Example 13.6
13.6 REMOTE/LOCAL Facility 13.7
13.6.1 Local Lock-Out 13.8
13.7 1250 Command Codes 13.9
13.7.1 Introduction 13.9
13.7.2 Command Code Format 13.9
13.7.3 Generator Commands 13.10
13.7.4 Synchroniser Commands 13.10
13.7.5 Amplitude Compression Commands 13.11
13.7.6 Auxiliary Generator Commands 13.11
13.7.7 Analyzer Commands 13.11
13.7.8 Sweep Commands 13.12
13.7.9 Display Commands 13.12
13.7.10 Plotter Commands 13.12
13.7.11 Status Commands 13.13
13.7.12 Variable Commands 13.13
13.7.13 File Commands 13.13
13.7.14 Program Commands 13.14
13.7.15 Data Output Commands 13.14
13.7.16 RS423/GPIB Commands 13.14
13.7.17 Function Commands 13.15
13.7.18 Miscellaneous Commands 13.15
13.7.19 Self Test Commands 13.16
13.7.20 Commands in Alphabetical Order 13.16
13.8 GPIB Controller: Language Used in Program Examples 13.19
13.9 Command Query 13.19
To Next Page
Loading...
