Solartron 1250 - Chapter 16 The 1251 Multichannel Analyzer System

16-1
16
The 1251 Multichannel Analyzer
System
Section Page
16.1 Introduction 16.2
16.2 Description 16.2
16.3 System Configuration 16.2
16.3.1 1250-1251 Interface Bus 16.2
16.3.2 IEEE 488 Interface Bus 16.2
16.3.3 1250 Series Options 16.2
16.4 Connecting Up 16.4
16.4.1 Safety: Connecting the ac Mains 16.4
16.4.2 Connecting up the 1250-1251 Interface Bus 16.4
16.5 1251 Unit Identification Switches 16.5
16.5.1 Analyzer Channel Numbering 16.5
16.6 Manual Operation of the System 16.5
16.6.1 Introduction 16.5
16.6.2 Manual Setting up of the 1251 System 16.5
16.6.3 Setting up the 1251 Analyzers 16.6
16.6.4 Displaying and Plotting data from the 1251 Analyzers 16.6
16.6.5 Checking the Analyzer and Display/Plotter Menu Settings 16.7
16.7 Remote Operation of the System 16.7
16.7.1 Introduction 16.7
16.7.2 GPIB Capability Code 16.7
16.7.3 Setting up the GPIB Configure Menu 16.8
16.7.4 Data Transfer Speeds 16.8
16.7.5 GPIB Output Buffers 16.8
16.7.6 GPIB Addresses 16.9
16.7.7 1251 Multichannel Analyzer Output: Complete Block Format 16.9
16.7.8 ASCII Format 16.9
16.7.9 Dump Mode Format 16.10
16.8 1251 Multichannel Analyzer Specification 16.11