4-1
4
Making Measurements:
The Generator
Section Page
4.1 Simple Measurements 4.2
4.2 Setting the Generator 4.2
4.2.1 Introduction 4.2
4.2.2 Setting the Generator Menu 4.2
4.2.3 Waveform 4.2
4.2.4 Frequency 4.3
4.2.5 Clear 4.4
4.2.6 Amplitude 4.4
4.2.7 Bias 4.4
4.2.8 Modulated Carrier 4.4
4.3 Checking Generator Settings: Using the Status Displays 4.4
4.4 Starting the Generator 4.5
4.4.1 Generator Start Key 4.5
4.4.2 Generator Waveform Starting Point 4.5
4.5 Stopping the Generator 4.5
4.5.1 Introduction 4.5
4.5.2 Generator Stop Key 4.5
4.5.3 Generator Stop @ Key 4.6
4.5.4 Applications of the Stop @ Key 4.6
4.5.5 Generator Overload Protection 4.7