Menu Summary 1250 Frequency Response Analyzer
8-2 AMK/1250/1
8.1 MENU SUMMARY
The table below is a summary of all 1250 menus.
Notes:
a. Italics denote default values.
b. Round brackets denote that a numerical entry is required, which may be up to 5 digits plus
decimal point, and exponent, unless an integer is indicated in the table.
c. Limits are shown for each numerical entry, e.g. the range of frequency that can be entered
via the FREQ soft key is 1E-5 to 65535 Hz, as shown in the table.
d. If just initialised, the 1250 displays "not entered" in front of the round brackets; otherwise
the last ENTERed value is displayed. When "not entered" appears, the default value is
operative.
e. Square brackets denote choice via the SELECT key.
f. All voltages are expressed as rms values.
To Next Page
Loading...
