Additional Displayed Information 1250 Frequency Response Analyzer
11-10 AMK/1250/3
ERROR CODES: SUMMARY (cont.)
Group 4 = Learnt Program, File and Variable
41 Line number not found
42 Jump outside Program mode
43 Attempt to step variable out of range
44 File empty
45 Illegal File access
46 Illegal File size entry
Group 5 = Missing Boards
50 Analyser not present
51 (Spare code)
52 (Spare code)
53 Generator not present
54 Control not present
55 Synthesizer not present
56 Mod/Demod not present
57 Synchroniser not present
58 Auxiliary Generator not present
59 Plotter not present
Group 6 = Illegal I/O Manipulation
60 Changing I/O device during Learn sequence
61 Attempt to change operating conditions from a non enabled I/O device
Group 7 = System Errors
70 Out of Memory
71 NVRAM Corrupted
72 Not Supervisor
Group 8 = Measurement Validity is Suspect
81 Overload
82 Auto Integration terminated before valid completion
83 A combination of 81 and 82
84 Amplitude Compression failure
85 A combination of 81 and 84
86 A combination of 82 and 84
87 A combination of 81, 82 and 84
88 Internal Hardware Error
89 Analysis terminated early, by ANALYZER STOP key
Group 9 = Synchroniser and Slave Analyzer Errors
91 (Spare Code)
92 (Spare Code)
93 (Spare Code)
94 Synchroniser not Ready
95 No results available from Slave Analyser(s)
96 (Spare Code)
97 (Spare Code)
98 (Spare Code)
To Next Page
Loading...
