Sony DVS-9000SF - Page 105

105DME Special Effect Operations
Chapter 11 DME Operations
The Light 1 menu appears.
2 Press [Light 1], turning it on.
This enables the Light 1 light source, and you can now use the knobs to
adjust the parameters.
3 Set the following parameters.
• Lowering the brightness of the image makes Spotlighting more
effective.
• The Total Ambient setting is shared with the Lighting function.
4 In the <Spot Mode> group, select the type of light source.
Parallel: Parallel light source. The direction can be set.
Point: Point light source. The position can be set.
Line: Line light source. The position and angle can be set.
Whole: Non-directional light source which illuminates the whole image
(no settings).
For more information about light source types, see “Digital Multi Effects
(DME)” in Chapter 1 (Volume 1).
5 According to the selected light source type, set the following parameters.
When you selected Parallel
a) Minus moves counterclockwise, plus moves clockwise.
When you selected Point
Knob Parameter Adjustment Setting values
1 Total
Ambient
Brightness of whole image 0.00 to 100.00
2 Intensity Intensity (brightness) of the light
source
0.00 to 100.00
3 Soft Softness of the lighted area 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Longitude Longitude
–8.00 to +8.00
a)
2 Latitude Latitude –8.00 to +8.00
Knob Parameter Adjustment Setting values
1 X Movement in X-axis direction
–6.00 to +6.00
a)
2 Y Movement in Y-axis direction
–6.00 to +6.00
b)
3 Z Movement in Z-axis direction
–6.00 to +6.00
c)