Sony DVS-9000SF - Page 337

337Setup Relating to DCU
Chapter 16 Engineering Setup
For a recorder, the input port setting
2. Maximum Open Delay: Maximum time required to open a file
3. Maximum Cueup Delay: Maximum time required to cue up
4. Play After Cueup Delay: Delay from the cueup state to play
5. Stop Delay: Delay from issuing the stop command until actually stopping
6 Turn the knob to set the disk recorder video port number or response speed.
When setting the video port number
a) 0: No assignment
When setting the response speed
7 Press [Set].
This confirms the setting.
8 If required, repeat steps 4 to 7, to set other items.
Knob Parameter Adjustment Setting values
2 Setting Video port number
0 to 127
a)
Knob Parameter Adjustment Setting values
2 Setting Response speed 0 to 255