83DME Special Effect Operations
Chapter 11 DME Operations
2
Set the following parameters.
Circle settings
The Circle effect makes a circle with the image.
To apply the Circle effect
With the Circle menu displayed, set the following parameters.
To make the axis of modulation vertical
Press [Mod V], turning it on.
The axis of modulation when converting to the circle becomes vertical.
Panorama settings
The Panorama effect curves the upper and lower edges of the image to
emphasize the sense of perspective.
To apply the Panorama effect
With the Panorama menu displayed, set the following parameters.
Page Turn settings
The Page Turn effect turns the image like turning a page.
To apply the Page Turn effect
With the Page Turn menu displayed, use the following procedure.
1
In the <Split Mode> group, select the split mode.
H&V: The image turns as it is split from the center into 4 parts: left, right,
upper, lower.
H: The image turns as it is split from the center into 2 parts: left, right.
Knob Parameter Adjustment Setting values
1 H Horizontal lens center position –5.000 to +5.000
2 V Vertical lens center position –4.000 to +4.000
Knob Parameter Adjustment Setting values
1 Radius Size of circle 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Curve H Horizontal curve ratio –100.00 to +100.00
2 Curve V Vertical curve ratio –100.00 to +100.00
3 Position H Horizontal curve center position –4.000 to +4.000
4 Position V Vertical curve center position –3.000 to +3.000
To Next Page
Loading...
