Sony DVS-9000SF - Page 82

Chapter 11 DME Operations
82
DME Special Effect Operations
2 Depending on the selected lens shape, set the following parameters.
• When Circle, Rectangle, Star, or Heart is selected
• When Bar is selected
• When Cross is selected
To make only the lens part visible
Press [Lens Only], turning it on.
The parts of the image outside the lens are removed.
To set the lens center position
Use the following procedure.
1 Press [Position], turning it on.
Knob Parameter Adjustment Setting values
1 Magnify H Magnification ratio –100.00 to +100.00
2 Curve H Curve ratio –100.00 to +100.00
3 Size H Size 0.00 to 100.00
4 Angle Slant angle –8.000 to +8.000
5 Aspect Aspect ratio –100.00 to +100.00
Knob Parameter Adjustment Setting values
1 Magnify H Magnification ratio –100.00 to +100.00
2 Curve H Curve ratio –100.00 to +100.00
3 Size H Size 0.00 to 100.00
4 Angle Slant angle –8.000 to +8.000
Parameter group [1/2]
Knob Parameter Adjustment Setting values
1 Magnify H Horizontal magnification ratio –100.00 to +100.00
2 Curve H Horizontal curve ratio –100.00 to +100.00
3 Size H Horizontal size 0.00 to 100.00
Parameter group [2/2]
Knob Parameter Adjustment Setting values
1 Magnify V Vertical magnification ratio –100.00 to +100.00
2 Curve V Vertical curve ratio –100.00 to +100.00
3 Size V Vertical size 0.00 to 100.00