5-2. Automatic Adjustment
5-2-1. Execute the Automatic Level Setup
1. Press the LEVEL button (AUTO SETUP block) of MSU.
LEVEL button lights. (ON)
2. Press the START/BREAK button (AUTO SETUP block) of MSU.
START/BREAK button lights (ON), automatic adjustment is executed.
After the adjustment is completed, the message “Completed” is displayed.
Tip
When performing automatic adjustment using the camera menu, set the setup menu as follows.
MENU: MAINTENANCE
PAGE: AUTO SETUP
ITEM: AUTO LEVEL
HDC4300
5-9
To Next Page
