3. Disconnect the two harnesses from the connectors (CN1, CN3) on the MB-1214 board.
CN9
CN7
CN1
CN3
MB-1214 board
CN6
Harnesses
Harnesses
MB-1214 board
Counter measure
sheet
4. Remove the two screws, and detach the MB bracket.
5. Disconnect the two harnesses from the two connectors (CN5, CN8) on the MB-1214 board.
CN5
MB bracket
MB-1214 board
PSW2 x 5
Harness
Boss
CN8
Harness
Hole
Note
When installing the MB bracket, match the boss with the hole.
HDC4300
4-33
To Next Page
Loading...
