4.4.2 I:E/Tinsp
This lets you pre-select the type of breathing cycling. The following
options are possible:
Inspiration time/expiration time (Tinsp/Texp)
Breathing time ratio/frequency (I:E/Frequency)
Inspiration time/frequency (Tinsp/Frequency)
The settings remain stored and are only overwritten when resetting the
device to factory settings.
Fig. 61: I:E/Tinsp configuration
When you activate the "Display All Parameters" field, all current
breathing cycling values are shown in the parameter display.
Fig. 62: Parameter display with and without activated breathing cycling
display
To Next Page
Loading...
