Stephan EVETR - Selftest Error

10 Troubleshooting
208
GA-070T-0518V2.7-HAO-EN
 Fritz Stephan GmbH
10.2 Selftest error
Error during
power supply test
HW
 Battery malfunction
 Battery empty
 Check battery level, charge
battery if necessary
 If the error cannot be
corrected, contact
FRITZ STEPHAN GMBH
customer service, providing
the error code displayed
Error during valve
test
HW
 Valve malfunction
 Contact
FRITZ STEPHAN GMBH
customer service, providing
the error code displayed
Error during sensor
test
HW
 Sensor system malfunction
 Check secure connection of
the patient tube system
 If the error cannot be
corrected, contact
FRITZ STEPHAN GMBH
customer service, providing
the error code displayed
Error during
turbine test
HW
 Turbine malfunction
 Check secure connection of
the patient tube system
 Check system for leakage
 Check sealing plug
on Y piece
 If the error cannot be
corrected, contact
FRITZ STEPHAN GMBH
customer service, providing
the error code displayed
Tab. 45: Selftest error