Do not immerse the device in liquids! Use cleaning solutions sparingly. Excess liquid
may enter the housing and damage the device.
11.2 Information about cleaning agents and
disinfectants
When using cleaning agents and disinfectants, pay attention to the correct
concentration and dwell time to rule out any damage to the materials.
Always closely follow the instructions of the cleaning agent manufacturer for using
the cleaning agent!
When using agents other than those specified, please contact the manufacturer of the
disinfectant to confirm its compatibility with ventilation and inhalation systems
(safety data sheet, toxicity).
When using cleaning agents and disinfectants, observe the rules established by the
professional associations on the use of cleaning agents and disinfectants.
Do not use petroleum-based cleaning agents, acetone, or other harsh cleaning agents!
These agents can damage the device material and cause malfunctions.
Disinfectants based on amines and their derivatives can damage silicone parts
(e.g. patient tubes) and are therefore not suitable for use on the device.
To Next Page
Loading...
