Stephan EVETR - Deep Sleep Mode; Sound

4 System Settings
104
GA-070T-0518V2.7-HAO-EN
 Fritz Stephan GmbH
4.4.7 Deep Sleep mode
Pressing the Start button will put the EVE into Deep Sleep mode for
transport.
NOTE
After putting the EVE
TR
into Deep Sleep mode, the device must be connected to the
mains supply in order to be powered on.
4.4.8 Sound
This sub-menu lets you separately adjust the alarm volume for day
and night operation in the range of 30 – 100%. You can also
determine a start time for both operating modes.
Fig. 64: Setting the alarm volume
WARNING
The alarm volume must be selected so it can be heard over ambient noise. Otherwise,
the patient may be put at risk because the user may not be able to hear acoustic
indicators for existing alarms.