Stephan EVETR - Configuration for Use of the Easyflow Ncpap System118; Installing the Expiration Valve

5 Preparation for use
118
GA-070T-0518V2.7-HAO-EN
 Fritz Stephan GmbH
5.3.3 Configuration for use of the EasyFlow nCPAP system
Fig. 68: Configuration with EasyFlow nCPAP system
1 Humidifier chamber filling
connection
5 Prong / Mask
2 Tube system
6 Flow sensor adapter
3 Decoupling tube
7 Distal expiration valve
4 Applicator
5.4 Installing the expiration valve
CAUTION
Carefully insert the expiration valve in the corresponding connection on the right side
panel and allow to engage. Do not tilt the expiration valve or press it in with force.
Danger of breakage!
The EVE
TR
lets you use both distal (away from the patient) and proximal
(close to the patient) expiration valves.