Stephan EVETR - Troubleshooting; List of Errors

®
10 Troubleshooting
 Fritz Stephan GmbH
GA-070T-0518V2.7-HAO-EN
195
10 Troubleshooting
NOTE
All pulse oximetry-related alarms are listed in the corresponding supplemental
operating manual.
NOTE
Volume alarms are not active during non-invasive ventilation methods.
10.1 List of errors
TA
Technical alarm
PA
Patient alarm
HW
Notifications
MP
MP alarms
Medium priority alarm
Flash frequency: 0.625 Hz
HW
MP
HW/MP alarms
Alarm starts out as a notification and
becomes an MP alarm after 30 seconds.
MP/
HP
MP/HP alarms
Alarm starts out as an MP alarm and
becomes an HP alarm under defined
conditions.
HP
HP alarms
High priority alarm
Flash frequency: 2 Hz
Color code
HP
MP
Notifications
C-A-F-A-F
C-A-F
-
C2-B-A-G-F
C2-B-A
-
C2-C-C-C2-C
C2-C-C
-
C-C-C-C-C
C-C-C
E-C
Priority/type of alarm
Sequence