Stephan EVETR - Replacing the Fan Filter; Replacing the HEPA Filter

®
11 Care and maintenance
 Fritz Stephan GmbH
GA-070T-0518V2.7-HAO-EN
231
Replacing the HEPA filter 11.11.1.2
 Remove the side panel and coarse filter as described in
chapter 11.11.1.1.
 Pull out the HEPA filter by carefully puncturing it using a sharp
object or screwdriver.
Fig. 117: Replacing the HEPA filter
 Install the new HEPA filter.
 Replace side panel and coarse filter.
Replacing the fan filter 11.11.1.3
 Remove the screw on the right side panel.
Fig. 118: Removing the screw on the side panel