Stephan EVETR - Info; Display; Time and Date

®
4 System Settings
 Fritz Stephan GmbH
GA-070T-0518V2.7-HAO-EN
89
4.1.1 Info
This sub-menu lets you access the following device-specific data:
Device serial number
(ID-Number)
Mainboard SW
Operating hours
Bootloader SW
Date
MAC address
Service date
Masimo module (optional)
Blower module
Bootloader Blower
Blower SW
Bootloader motor
Blower SW motor
PSU SW (power supply)
Akkupack2 SW (battery pack 2)
Battery SW
Bootloader PSU
Akkupack1 SW (battery pack 1)
Bootloader battery
4.1.2 Display
This sub-menu lets you separately adjust the display brightness for
day and night operation in the range of 20 – 100%. You can also
determine a start time for both operating modes. Use the »Settings
activated« box to activate/deactivate the configured settings.
NOTE
Settings made in the "Display" sub-menu are also used when switching manually
between day/night mode in the function area (see chapter 3.1.3).
4.1.3 Time and Date
This sub-menu lets you set the date and time.
Mainboard SW
Blower SW
PSU SW
(power supply)