Stephan EVETR - Page 187

®
8 CO2 measurement (optional)
 Fritz Stephan GmbH
GA-070T-0518V2.7-HAO-EN
187
WARNING
Always use a bacterial filter on the waste gas side if the collected sample gas should
be breathed back.
WARNING
Use only T adapters whose sample collection point is located in the middle of the
adapter.
WARNING
Excessive scavenger system pressure may impact gas sample flow.
WARNING
Waste gas must be returned to the patient system circuit or a scavenger system.
WARNING
Do not position the ISA™ analyzer in a way where it is at risk of dropping onto the
patient.
WARNING
Position the ISA™ analyzer securely to avoid device damage.
WARNING
Do not put strain on the ISA™ analyzer's cable.