3 Design and functional description
The various measured values can be viewed by selecting the »Protocol«,
»Measured Values«, and »Pulse oximetry« fields.
The following data is automatically archived in the logbook with the
associated time in hours and minutes. This data can be viewed by
selecting the »Logbook« field.
The following events are saved:
Start / Stop/Standby
Settings and change to the settings
Execution of special actions and maneuvers
Occurring alarms (ON/OFF)
The last 1000 values can be displayed on the monitor. In total up to
1100 entries can be saved in the device. If this value is exceeded, the
oldest entries are automatically overwritten.
The logbook data can be saved on the internal SD card (see chapter 4.4.9).
To Next Page
Loading...
