RFID technology
The RFID transponders are embedded in the
hall floor. They are located in approx. 10 mm
holes slightly outside the centre of the aisle at
different intervals. The RFID writing/reading
device is mounted to the load wheel axle un-
der the driver's cab. The RFID transponders
are maintenance-free.
– Keep the aisle clear of objects.
The RFID system is also used for distance
measurement in order to position the industrial
truck in the aisle.
Barcode
Barcode scanners fitted on the industrial truck
read the barcode labels in both drive direc-
tions while the truck is in motion. The barcode
labels are attached to the uprights approx. 50
cm above the floor. The scanners can be at-
tached to the industrial truck and the labels to
the rack on one or both sides.
– Do not cover or adjust the barcode scan-
ners.
– Check the barcode scanners for contamina-
tion.
– Check the barcode labels for contamination
and legibility.
– Do not cover barcode labels, e.g. with loose
packing material.
The barcode system is also used for distance
measurement in order to position the industrial
truck in the aisle.
Special equipment
7
Automatic braking systems
130 5231 804 2502 EN - 04/2020
To Next Page
Loading...
