SunStar SPS/E-BH6100 - User Manual

1) FOR AT MOST USE WITH EASINESS,
PLEASE CERTAINLY READ THIS MANUAL
BEFORE STARTING USE.
2) KEEP THIS MANUAL IN SAFE PLACE
FOR REFERENCE WHEN THE MACHINE
BREAKS DOWN.
MMEEEE--110000220033
USER
’’
S MANUAL
SPS/E-BH6100
R
SSuunnSSttaarr CCOO..,, LLTTDD..
Direct Drive, Electronically
Controlled Lock Stitch
Button Hole Sewing Machine
(Electronic Control Part)

Summary

Machine Safety Regulations

Operational Safety Precautions

Essential safety instructions to follow during machine operation.

Specifications

Operational Panel and Sewing Operations

Operational Panel Overview and Keys

Description of the operational panel layout, display, and keys.

Initial Display and Sewing Mode

Understanding the initial screen and entering sewing mode.

Pattern Number and Thread Tension Adjustment

Changing Pattern Number

Procedure for selecting and changing the pattern number.

Adjusting Thread Tension

Steps to adjust the thread tension value for sewing.

Pattern Data Information and Speed Settings

Changing Pattern Data Information

Modifying pattern parameters and initial screen settings.

Changing Sewing Speed

Procedure to adjust the sewing speed on the initial display.

Create Basic Pattern Shapes

Taper Pattern Creation Process

Steps to create a taper pattern including up/down bartacks and zigzag.

Up Bartack Shape Creation

Detailed steps to create the up bartack shape component.

Zigzag Shape Creation

Detailed steps to create the zigzag shape component.

Down Bartack Shape Creation

Detailed steps to create the down bartack shape component.

Square Bartack Pattern Creation

Up Bartack Shape for Square Bartack

Creating the up bartack component for square bartack patterns.

Zigzag Shape for Square Bartack

Creating the zigzag component for square bartack patterns.

Down Bartack Shape for Square Bartack

Creating the down bartack component for square bartack patterns.

Pattern Data for Square Bartack

Set Knife-Related Parameters

Number of Knives Setting

Left;Right Knife Space Setting

Blade Motion Method Setting

Blade Position Setting (Sensor;Timing)

Clamp Type Setting

Compensation of Eyelet Part

Adjusting Eyelet Rotation and Radius

Adjusting Eyelet X-Position and Slant

Compensation of Zigzag Part

Adjusting Zigzag Rotation, Length, and Width

Lower Bar Tack Correction

Correct Taper Slant and Square Bartack Slant

Correct Square Bartack X;Y Directions

Set Chain Sewing Parameters

Enable;Use;Disable Chain Sewing

Set Back-Tack Function

Setting Starting and Ending Back-Tack Values

Set Production Counter

Enable;Disable and Select Counter Type

Initialization and Machine Testing Functions

System Initialization

Machine Testing Functions

Accessing and performing various machine diagnostic tests.

Jog XYZ Test (Step Motor)

Thread Tension Solenoid Test

Error Messages and Troubleshooting

Parameter Changing Methods and Classification

General Sewing Parameters (Group A)

Servo Motor Control Parameters (Group B)

SunStar SPS/E-BH6100 Specifications