Suzuki RM-Z450 - Installation

7-12 CLUTCH
INSTALLATION
Install the clutch release camshaft in the reverse order of
removal. Pay attention to the following points:
• Apply SUZUKI MOLY PASTE to the clutch release camshaft.
% 99000-25140: SUZUKI MOLY PASTE or equivalent
• Apply grease to the oil seal lip.
& 99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
• Install the clutch release camshaft

1 and connect the clutch
cable

2.
• Install the push rod and pressure plate. (!7-6, -7)
• Install the clutch cover and its gasket. (!7-7)
• Install the retainer

3.
• Install the cam chain tension adjuster cap bolt

4 and spring.
(!6-29, -30)
INSPECTION AFTER INSTALLATION
• Engine oil level and oil leakage (!2-10)
• Clutch cable play (!2-16)
• Smooth operation of clutch system