FUEL SYSTEM AND THROTTLE BODY 13-8
REMOVAL
• Remove the seat and radiator covers. ("5-2)
• Remove the fuel tank. ("13-2)
• Disconnect the TP sensor coupler
1 and fuel injector coupler
2.
• Disconnect the IAP sensor coupler
3.
• Remove the throttle cable cover
4.
• Disconnect the throttle cables from their pulley.
• Disconnect the hot starter cable from the throttle body.
CAUTION
After disconnecting the throttle cables, do not snap
the throttle valve from full open to full close. It may
cause damage to the throttle valve and throttle body.
To Next Page
Loading...
