Suzuki RM-Z450 - Rear Master Cylinder Removal and Disassembly

17-15 FRONT AND REAR BRAKES
REAR MASTER CYLINDER REMOVAL AND
DISASSEMBLY
• Drain brake fluid. ($17-4)
• Remove the cotter pin and then master cylinder rod pin

1
and washer.
• Remove the master cylinder

2 by removing the bolts.
• Place a rag under the brake hose union bolt

3 to catch spilled
brake fluid.
• Disconnect the brake hose by removing the union bolt

3.
• Remove the master cylinder.
• Remove the dust boot

4 and snap ring

5.
' 09900-06108: Snap ring pliers
• Remove the push rod

6.
• Remove the piston/cup set

7.