Suzuki RM-Z450 - Brake Pads Replacement; Front Brake Pads; Rear Brake Pads

17-5 FRONT AND REAR BRAKES
BRAKE PADS REPLACEMENT
FRONT BRAKE PADS
• Remove the cap

1 and pad mounting pin

2.
• Remove the brake pads

3.
NOTE:
Replace the two brake pads as a set.
• Fit the new brake pads into the caliper.
• Tighten the pad mounting pin

2 to the specified torque.
# Brake pad mounting pin: 18 N·m (1.8 kgf-m, 13.0 lb-ft)
NOTE:
Pump the brake lever several times to seat the brake pads after
reassembling.
REAR BRAKE PADS
• Remove the pad mounting pin

1.
• Remove the brake pads

2.
NOTE:
Replace the two pads as a set.
• Fit the new brake pads into the caliper.
• Apply SUZUKI SILICONE GREASE to the O-ring.
% 99000-25100: SUZUKI SILICONE GREASE
or equivalent
• Tighten the brake pad mounting pin

1 to the specified torque.
# Brake pad mounting pin: 18 N·m (1.8 kgf-m, 13.0 lb-ft)
NOTE:
Pump the brake pedal several times to seat the brake pads after
reassembling.