FRONT AND REAR WHEELS 16-5
• Install new bearings with the special tool, using the suitable
spacer
A match for the outside dimension of bearings.
" 09924-84510: Bearing installer set
NOTE:
* Install the left side (disc side) bearing first and then the right
side bearing.
* After installing the bearings, inspect the bearings for smooth
movement.
• Install new dust seals and apply grease to their lips.
NOTE:
When installing the dust seal, place the manufacturer’s code
indicated side of the dust seal outside.
" 09913-70210: Bearing installer set
Bearing: # 40 Attachment
$ 99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
DISC PLATE REPLACEMENT
• Remove the disc plate.
• Apply THREAD LOCK SUPER to the bolts.
% 99000-32110: THREAD LOCK SUPER “1322”
or equivalent
• Tighten the bolts to the specified torque.
& Disc plate bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
To Next Page
Loading...
