Suzuki RM-Z450 - Primary Driven Gear and Clutch Sleeve Hub; Removal

7-8 CLUTCH
PRIMARY DRIVEN GEAR AND
CLUTCH SLEEVE HUB
REMOVAL
• Remove the clutch cover. (!7-3)
• Remove the pressure plate and clutch plates. (!7-3, -4)
• Flatten the lock washer

1.
• Hold the clutch sleeve hub with the special tool and loosen
the nut

2.
# 09920-53740: Clutch sleeve hub holder
09920-31020: Extension handle
• Remove the nut

2, lock washer

1 and clutch sleeve hub

3.
• Remove the washer

4 and primary driven gear

5.
• Remove the needle bearing

6 and spacer

7.