Suzuki RM-Z450 - Removal; Kick Starter

KICK STARTER 8-3
KICK STARTER
REMOVAL
• Drain engine oil. (!2-11)
• Drain engine coolant. (!14-3)
• Remove the brake pedal. (!17-18)
• Disconnect the radiator hose

1.
• Remove the kick starter lever

2.
• Remove the right crankcase cover

3, dowel pins, gasket and
O-ring.
• Remove the clutch component parts. (!7-8)
• Remove the kick starter idle gear

4.
• Unhook the end of return spring

5.
• Remove the kick starter shaft assembly

6.
• Remove the following parts from the kick starter shaft

7.
Return spring

8 Kick starter

B
Spring guide

9 Snap ring

C
Washer

0 Washer

D
Spring

A Kick starter drive gear

E
" 09900-06107: Snap ring pliers