13-3 FUEL SYSTEM AND THROTTLE BODY
• Lift and hold the fuel tank.
• Disconnect the fuel pump coupler
1.
• Place a rag under the fuel hose
2 and disconnect the fuel
hose
2 from the fuel pump.
• Remove the fuel tank assembly.
• Remove the fuel pump assembly
3 by removing its mounting
bolts diagonally.
FUEL TANK AND FUEL PUMP
INSTALLATION
Install the fuel pump and fuel tank in the reverse order of
removal. Pay attention to the following point:
• Install a new O-ring and apply grease to it.
# 99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
CAUTION
Be sure to disconnect the fuel hose
2 by your hand.
You may not disconnect the fuel hose
2 with any tool.
When removing the fuel tank, do not leave the fuel
hose
2 on the fuel tank side.
CAUTION
Never disassemble the fuel pump assembly
3.
CAUTION
Replace the O-ring with a new one.
To Next Page
Loading...
