Suzuki RM-Z450 - Clutch Release Camshaft; Removal; Inspection

CLUTCH 7-11
CLUTCH RELEASE CAMSHAFT
REMOVAL
• Remove the clutch cover and its gasket. (!7-3)
• Remove the pressure plate and push rod. (!7-3)
• Remove the cam chain tension adjuster cap bolt

1 and
spring. (!6-4)
• Disconnect the clutch cable

2 and remove the retainer

3.
• Pull the clutch release camshaft

4 out of crankcase.
INSPECTION
CLUTCH RELEASE CAMSHAFT
• Inspect the clutch release camshaft for abnormal deflection
and damage.
• If any defects are found, replace the release camshaft with a
new one.
OIL SEAL AND BEARING
• Inspect the oil seal for oil leakage and oil seal lip damage.
• Inspect the bearing for play and smooth movement.
• If necessary, replace the defective parts with a new one.
(!10-8 to -11)
CAUTION
Do not turn the crankshaft after removing the cam
chain tension adjuster cap bolt.