Suzuki RM-Z450 - Bearing Replacement

REAR SUSPENSION 19-16
BEARING, SPACER, DUST SEAL, OIL SEAL
• Inspect the bearings, spacers, dust seals and oil seals for
damage.
• If necessary, replace the defective parts with a new one.
• Insert the spacer into the bearings and inspect them for play
and smooth movement.
• If excessive play is noted, replace the bearing with a new one.
BEARING REPLACEMENT
• Remove the bearings with the special tool.
" 09921-20240: Bearing remover set (Remover 20 mm)
• Press the new bearings with the special tool. (!19-23)
" 09924-84521: Bearing installer
• Apply grease to the bearings.
% 99000-25010: SUZUKI SUPER GREASE “A”
or equivalent