ELECTRICAL SYSTEM 15-10
REGULATOR/RECTIFIER
• Remove the left radiator cover. (!5-2)
• Remove the regulator/rectifier
1.
• Measure the voltage between the lead wires using the multi-
circuit tester as indicated in the table below. If the voltage is
not within the specified value, replace the regulator/rectifier
with a new one.
" 09900-25008: Multi-circuit tester set
' Tester knob indication: Diode test (()
) More than 1.4 V (tester’s battery voltage)
NOTE:
If the tester reads 1.4 V and below when the tester probes are
not connected, replace its battery.
Unit: V
+ Probe of tester to:
- Probe of
tester to:
A (Y/R)
B (Y/R)
C (Br)
D (R)
A (Y/R) )
0.1 – 0.8
)
B (Y/R) )
0.1 – 0.8
)
C (Br) )) )
D (R)
0.1 – 0.8 0.1 – 0.8 0.2 – 0.9
To Next Page
Loading...
