Suzuki RM-Z450 - Page 346

20-6 SERVICING INFORMATION
FI SENSORS
THROTTLE BODY
ITEM STANDARD/SPECIFICATION NOTE
CKP sensor resistance 80 – 120 Ω
CKP sensor peak voltage 2.8 V and more
Crankshaft rotation signal sensor
resistance
0.1 – 0.8 Ω
Crankshaft rotation signal sensor
peak voltage
1.7 V and more
IAP sensor input voltage 4.5 – 5.5 V
IAP sensor output voltage 0.98 – 2.86 V at idle speed
TP sensor input voltage 4.5 – 5.5 V
TP sensor output voltage Closed Approx. 0.6 V
Opened Approx. 3.9 V
ECT sensor input voltage 4.5 – 5.5 V
ECT sensor resistance Approx. 2.58 kΩ at 20 °C (68 °F)
IAT sensor input voltage 4.5 – 5.5 V
IAT sensor resistance Approx. 2.58 kΩ at 20 °C (68 °F)
TO sensor resistance 16.5 – 22.3 kΩ
TO sensor voltage Normal 0.4 – 1.4 V
Leaning 3.7 – 4.4 V
When
leaning 65°
GP switch voltage 0.6 V and more From 1st to Top
Injector voltage Battery voltage
ITEM SPECIFICATION
Bore size 43 mm
I.D. No. 28H0
Idle r/min 2 000 ± 100 r/min
Throttle cable play 2 – 4 mm
(0.08 – 0.16 in)
Hot starter lever clearance 2 – 3 mm
(0.08 – 0.12 in)