5. ENGINE REMOVAL
5-1
Precautions in Operation...................... 5-1
Engine Removal .................................... 5-2
Engine Installation ................................ 5-6
Precautions in Operation
General Information
y The engine has to be supported with special service tools that can be lifted or adjustable.
y The following parts can be serviced as engine being mounted on frame:
Carburetor
Drive pulley, drive belt, clutch, and movable drive face assembly.
Start motor.
AC. Generator, oil pump and start one-way clutch.
Specification
Item
Capacity
Replacement 2400 c.c.
Replacement with oil filter changed 2700 c.c.
Engine oil capacity
Disassembly 3000 c.c.
Rear axle gear oil capacity Replacement 100 c.c.
Front differential gear oil capacity Replacement 200 c.c.
Engine & radiator 1750 c.c.
Reservoir 350 c.c.
Coolant capacity
Total 2100 c.c.
Torque Value
Engine hanger bolt 7.5~9.5kgf-m
Exhaust muffler mounting bolt 2.8~3.2kgf-m
Exhaust muffler connection nut 1.0~1.4kgf-m
5
Home page
Contents
To Next Page
Loading...
