Tadano AML-C - Telematics Check

Chapter C Chapter C
Maintenance Mode
111
W301-0411E
2.16 Telematics Check
To check various information of current Telematics status, select "Telematics Check" on the maintenance main
menu shown in the Fig. 1.3.1 and press the <
> key. The display will go to the Telematics check screen shown
in Fig. 2.16.1.
When the <
> key is pressed, the menu is quitted and the maintenance menu appears again.
The item "Telematics Check is shown in the maintenance menu only while ICF is connected to the AML.
Fig. 2.16.1 Telematics check screen