Chapter C Chapter C
Maintenance Mode
80
W301-0411E
Outline of Maintenance Mode
The AML has the following three basic operation modes.
This chapter describes the operation method in maintenance mode.
User Mode: Used by the operator to operate the crane.
For the operation method of User mode, refer to "Chapter B, User Mode."
Maintenance Mode: Used to perform the AML maintenance menu (operation check, reference of
history information, etc).
Also, some adjustment functions such as clock adjustment are included in the
maintenance mode.
Adjustment Mode: Used to adjust detectors, actuators, etc.
For the operation method of adjustment mode, refer to "Chapter D, Adjustment
Mode."
To Next Page
Loading...