Tadano AML-C User Manual

57
W301-0411E
Chapter B Chapter B
User Mode
4.5.7 Adjustment of Display Panel Contrast
1. Select the contrast adjustment menu icon, and push
the set key.
• The pop-up window for contrast adjustment
appears on the display panel.
2. Push the < > key (-) or < > key (+) to adjust the
contrast.
• Push the < > key (+) to increase contrast and the
< > key (-) to decrease contrast.
3. Push the < > key (set).
• When registration is completed, the pop-up
window closes and the AML returns to the crane
operation state.
When you want to stop registration, push the
< > key (EXT). The pop-up window closes and
the AML returns to the crane operation state
without changing registration.
If you push the < > key (EXT) for 3 seconds or
more, the contrast returns to the initial setting.
Even after the AML is turned off, the registered
information is retained. When the AML is turned
on, the operation starts with the retained
information.
4.5.8 Transmission of Telematics alarm data
(Refer to Chapter C "2.16 Telematics Check)
Fi
g
. 4.5.6

Tadano AML-C Specifications

General

Brand	Tadano
Model	AML-C
Category	Measuring Instruments
Language	English