Foreword
viii
W301-0411E
6. Reduction of Rated Capacity
Boom Lift
The rated capacities for boom lift assume that the jib is stowed in the specified position and the main winch is
used. When the jib is attached to the boom end during boom lift, subtract the value in the table below from the
rated capacity.
Single Top Lift and Jib Lift
The rated capacities for single top lift or jib lift assume that the main winch is used. If you perform single top lift
or jib lift using the auxiliary winch, subtract the mass of the main hook block from the rated lifting capacity
values.
(ex. : GR-750XL-2)
△
1
343-979-01190
△
1
343-979-01200
To Next Page
Loading...