34
W301-0411E
Chapter B Chapter B
User Mode
2.4 Registration of Number of Part-lines of Wire Rope
14. Push the < > key (rope part line) to register the number of part lines to be used.
• The pop-up window for rope part line registration
appears on the display panel.
Each time you push the < > key (rope part line),
the number of part lines changes.
The hook block is automatically selected and shown
according to the registered lift state. If the displayed
hook block symbol is not the one you want to register,
push the < > key (main hook block) to change the
indication.
You can register only the number of part lines specified for each model.
Instead of the rope part line key, you can use the < > key (backward) or < > key (forward) to
change the display of the number of part lines.
When you want to stop registration, push the < > key (EXT).
The pop-up window closes and the AML returns to the state before the start of the registration.
To Next Page
Loading...
Need help?
General