Chapter C Chapter C
Maintenance Mode
123
W301-0411E
4.3 Error Notification
When the AML detects an error, it displays the error code on the LCD and, at the same time, it outputs the beep
sound to notify that an error has occurred. The error code continues to be displayed while the error exists.
Fig. 4.3.1 Error code display screen
When Japanese is selected for the language, when the <
> key is pressed while the error code is being
displayed, a sub window appears in the LCD to show the error message as shown in Fig. 4.3.2.
Under this status, pressing the <
> key closes the sub window, and the error code display is restored.
When two or more errors occur simultaneously, each of the error codes is displayed.
Fig. 4.3.2 Error message display screen
To Next Page
Loading...
Need help?
General