50
W301-0411E
Chapter B Chapter B
User Mode
4.4 Fuel Consumption Indicator
When you check the fuel consumption indicator, be careful that a crane operation is not hindered.
Distraction can cause a serious accident.
This function shows the fuel consumption during a crane operation or standby.
Checking the indication enables you to operate a crane in a environmentally friendly way.
The fuel consumption is displayed when the PTO is "ON", the following items are shown.
The fuel consumption includes the moment when outriggers are not used (when traveling).
1.Current Fuel Consumption.................
The current fuel consumption (hour/gallon)
during a crane operation is shown.
The max. value in a bargraph is 1.0 hour/gallon.
2.Average Fuel Consumption...............
The average fuel consumption (hour/gallon)
during a crane operation is shown as a bargraph.
The average fuel consumption is reset during
standby or when PTO switch is turned to "OFF".
3.Fuel Consumption during Standby.....
The fuel consumption (gallon) during standby is
shown.
4.Standby Period.................................
The crane standby period (min) is shown.
The crane standby period is the period when each operation lever and pedal are in neutral position.
Fuel Consumption during Standby and Standby Period are displayed when a crane has been in
standby mode for a specified period.
The displayed data may be different from the actual data depending on work conditions.
Check the fuel gauge to see the remaining fuel amount.
The fuel consumption history during a crane operation and standby is displayed.
Refer to ”4.5 User Adjustment Menu”.
To Next Page
Loading...
Need help?
General