Tadano AML-C User Manual

Chapter D
Chapter DAdjustment mode
152
W301-0411E
1.2 Structure of Adjustment Mode Menu
In the maintenance mode and adjustment mode, a menu having a hierarchical structure is used.
Use the <
> key to go back to the previous hierarchical level.
ID Code Check
Adjust
Di Check
Length/angle
adjustment
A
ML precision correction [Adjustment not needed]
(Maintenance mode menu)
Performance setting [Adjustment not needed]
Operation history erase
A
ML emergency SW History Erase
Boom length TAP correction [Adjustment not needed]
Option selection
O/R Emergency History Erase
Slow stop adjustment
Boom length adjustment
Boom angle adjustment
Swing angle 1 adjustment
Swing angle 2 adjustment
Right front O/R adjustment
Left front O/R adjustment
Right rear O/R adjustment
Left rear O/R adjustment
Moment/load radius adjustment
Swing right output adjustment
Boom up output adjustment
Valve
adjustment
Swing left output adjustment
Boom down output
A
djustment mode menu
Telematics setup [Adjustment not needed]
ID code input

Tadano AML-C Specifications

General

Brand	Tadano
Model	AML-C
Category	Measuring Instruments
Language	English